Nor does it care whether the object is oriented to any of the c-planes, it just wants the start and end points of a span and the dimension you want the span to be. I like this way best because I don’t even have to know what the current size is or the distance I want to move the face, only the final dimension I want. Invoke the command, select the object, click on the opposite side from the one you want to shorten/lengthen to set a base point, click on the side you want to move to establish the span you want to change, type the new length (70 or 2.75 in your examples), and hit enter and it will adjust the span to the new measurement. Tried tweaking dimension styles (altered font, size, color, etc.) with no change. Retried using dimension but still no values. Deleted entire application with appcleaner (throws out all related installed files in Library directories, such as Preferences, etc.) and then reinstalled. Control-Shift and pick the face you want to move, then just drag and watch the status line to get the right snap point.Īnother easy way is to use 1D Scale. Hello, After upgrading from previous WIP version. Sub-Object selection works great here, especially if your Grid Snap Spacing is set to an interval you often work with (in this case, 1/4" or 1/8"). Instead of typing 0,0,0 for the origin, just type 0 and hit enter. The symbol tells Rhino that my coordinates are relative to the start point, not 0,0. Again, Rhino automatically converts the fractions to decimals and places the opposite corner at the correct point. When asked for the opposite corner I type 18-3/16" and hit Enter. When asked for the start point I snap to the midpoint of the top of the previous rectangle. It’s all about For example: I want to draw another rectangle, 23-3/4" wide by 18-3/16" long from the midpoint of the top of the previous rectangle. You enter relative coordinates in the same manner but, like AutoCAD, Rhino has to know that the coordinates are relative. Makes it easy to bounce back and forth between Rhino and AutoCAD without changing the method of entering coordinates. This is one of the things I’ve always loved about Rhino. IIRC, you could alternatively enter these dimensions as 4’ 8-1/4", 3’ and Rhino will still take care of the math automatically. Rhino will automatically convert the fraction part of the first dimension to a decimal, and place the corner at the correct point. When it asks for a starting point I type 0,0,0 (Old habit that assures me that I’m starting at Z=0 on the current C-plane.) When asked for the opposite corner I type 56-1/4", 36" and hit Enter. With my units set to inches I click the rectangle button. For example: let’s say I want to draw a 2D rectangle 56-1/4" wide by 36" long working in Top View. When working with feet and inches in Rhino I’ve always set my units as inches and simply entered dimensions just as I would in AutoCAD. When prompted for the move from point, snap to any point on the edge of the face, move the mouse in the direction you want to move the face, enter 1/4", hit Enter. With units set to inches, enter the command, select the face. What is rather weird with that latter setting is that it reverts to 1.0 after you have changed it - making it hard to get back to the original size a few days later.What you want is MoveFace not MoveEdge. If you later find out that that doesn’t work and want to change both the size in paper and in model space with the same ratio, you can put a scaling factor in Scale distances. If my model is 10 meters long, I want dimension that I create in model space to be readable when the entire model is visible and I therefore want them to be 320 mm, or 80 times as high. It doesn’t matter if the dimensions were created in model space or in paper space by snapping to the model.įor example, on a A3 sheet, I want all dimensions to be 4 mm high. The numbers that you put into the fields in Document Properties > Annotations > Dimensions > Layout sizes are sizes in document units that the dimensions will have on paper.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |